The SFX-06 Bass EQ Direct Box is the latest Seymour Duncan creation designed to get your gig or recording session off the ground!
-
1/4" input
-
Balanced XLR output with ground lift
-
3-band EQ
-
Bypass footswitch
-
Slap Contour preset EQ footswitch
-
LED lights for both footswitches
-
16-gauge steel chassis
Seymour Duncan SFX-06 Paranormal Bass EQ Direct Box
The Paranormal Bass EQ Direct Box is not your ordinary direct box. The easiest way to shop for Seymour Duncan SFX-06 Paranormal Bass EQ Direct Box online is to click on our latest offers featured on this page, or use button 'Click here' above. Like all Dls, it sports a balanced line out XLR jack (with ground lift) so you can feed a front-of-house mixing board or a recording console with no loss of signal. But that`s where the similarities end, because the Paranormal Bass Direct Box also features three bands of active EQ specifically optimized for bass. This allows you to dial in your tone in any room, sculpting your lows, mids, and highs quickly and easily with up to 12dB of boost or cut for each band of EQ. It`s the perfect solution for bassists who want the flexibility of an active system but don`t want to modify their instrument.
The SFX-06 also features our proprietary Slap Contour switch, which applies an additional preset EQ curve to whatever settings you`ve chosen with the 3-band EQ. This produces a tone that`s perfect for slap playing but also works great as an alternate sound for fingerstyle or pick playing. This switchable function makes the Paranormal Bass Direct Box even more flexible onstage and in the studio. It`s a must for every gig and every session.
The Paranormal runs in a single 9-volt battery or a regulated DC power supply. And like all Seymour Duncan pedals, it`s built like tank.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
-
Gain Range: +/- 12dB
-
Input Impedance: 1MOhm
-
Output Impedance: 2KOhm
-
Maximum Output before Clipping: 2.6Vrms
-
Noise and Hum: -92dBV
-
THD at 1Vrms out at 1 KHz: 0.002 percent
-
Circuitry: FET Input OP-Amps with Discrete Gyrators
-
Power: DC 9 12V; Battery or Regulated DC Adapter
-
Current Consumption: 2.9 mA Max
-
Dimensions: 5.50 x 5.20 x 2.20 inches
-
Weight: 1.9 Lbs
-
Chassis Material: 16 Gauge Steel
-
EQ Center Frequencies: Bass - 30Hz, Mid - 650Hz, Treble - 5.2KHz
-
Slap Contour Frequencies: +6dB at 80Hz, -6dB at 650Hz
|
