A solid, solid state preamp combo head that gives you a nice boost in a small package, the Little Mark 250 delivers 250W of power into a 4 ohm cabinet or 150W into an 8 ohm cabinet. Information About Markbass Little Mark 250 Bass Amp Head on our secure online store. It comes with a 4-band EQ, filters, and quality I/O designed to save you from a performance disaster.
-
Solid state preamp analog bass head
-
Provides 150W RMS at 8 ohms, 250W RMS at 4 ohms
-
1/4" input jack works with active or passive basses
-
Gain and Master volume controls
-
Clip warning light
-
EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
-
VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
-
Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
-
Balanced XLR out
-
Ground lift switch to eliminate hum
-
Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
-
Send and Return Effect ensures main signal continues even if something dies in your effects chain
-
Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections
-
Surface-mount components are silicon-sealed to isolate vibrations
-
Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation
-
Integrated threaded posts for easy assembly/disassembly and added durability
-
Rigid 2mm thick aluminium chassis for a long-lasting finish
Markbass Little Mark 250 Bass Amp Head
The Markbass Little Mark 250 bass amp head is a high-quality bass amplifier with a solid-state preamp and an analog power amp. The Little Mark 250 delivers 250W of power into a 4 ohm cabinet, or 150W into an 8 ohm cabinet. This Little Mark has a 4-band EQ, Markbass` VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters, as well as both Gain and Master volume controls. The front panel accepts both a passive or active bass 1/4" input, as well as a balanced XLR input for acoustic bass pickup systems or a microphone. On the rear panel you`ll find a Neutrik Speakon combo jack output that accepts both Speakon or 1/4" speaker cable as well as a second 1/4" speaker out jack. You`ll also find a balanced XLR out, unbalanced tuner out so you can tune as you play without passing your signal through pedals, and a Send and Return Effect loop which saves you from losing your signal if one of your pedals dies or a cable in the chain gives out.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
-
Power
-
Input impedance: 500Kohm, max. voltage: 15 Vpp
-
Balanced input impedance: 22Kohm, max. voltage: 25 Vpp
Effect Return impedance: 22Kohm, max. voltage: 25 Vpp
-
Output Power: 150W RMS at 8 ohms, 250W RMS at 4 ohms
-
Power Requirement: 100/120V; 230V; 240V; 50/60Hz
Controls
-
GAIN: 80dB to +23dB range
-
GROUND LIFT: Switch on rear panel
-
MASTER VOLUME
Equalization
-
LOW
-
Center frequency: 40Hz; level ±16dB
-
LOW-MID
-
Semi-parametric: frequency 360Hz, level ±16dB
-
HIGH-MID
-
Semi-parametric: frequency 800Hz, level ±16dB
-
HIGH
-
Semi-parametric: 10kHz shelf; level ±16dB
-
VPF (Variable Pre-shape Filter)
-
Center frequency: 380Hz (cut)
-
VLE (Vintage Loudspeaker Emulator)
-
250Hz 20kHz cut
Outputs
-
EFFECT SEND
-
Unbalanced, max. voltage 20 Vpp (pre-EQ)
-
TUNER OUT
-
Unbalanced, max. voltage 25 Vpp
-
LINE OUT
-
Balanced XLR, max. voltage 10 Vpp
-
SPEAKER OUT
-
Speakon, 1/4"
Other
-
Dimensions: 10.87"(W) x 2.8"(H) x 10.1"(D)
-
Weight: 5.73 lbs.
|
