Markbass` F1 is a surprisingly powerful but tiny bass head that gives you a 500W boost, but is small enough to fit in most gig bags. Includes description of Markbass F1 500W Bass Amp Head, the option to purchase your favorite brand online. It has a 4-band EQ, Markbass` exclusive VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters, as well as several quality I/O options that ensure you never lose your main signal due to an effects chain problem.
-
Digital amp bass head
-
Provides 300W RMS at 8 ohms, 500W RMS at 4 ohms
-
1/4" input jack works with active or passive basses
-
Gain and Master volume controls
-
Clip warning light
-
EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
-
VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
-
Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
-
Balanced XLR out
-
Ground lift switch to eliminate hum
-
Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
-
Send and Return Effect ensures main signal continues even if something dies in your effects chain
-
Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections
-
Surface-mount components are silicon-sealed to isolate vibrations
-
Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation
-
Integrated threaded posts for easy assembly/disassembly and added durability
-
Rigid 2mm thick aluminium chassis for a durability on the road
Markbass F1 500W Bass Amp Head
The F1 is Markbass` lightest and smallest bass amp head to date, boasting an unbelievable power-to-weight ratio of more than 100 watts per pound. It`s digital power amp gives it a super-fast response and a crisp, clear, full sound that will convey every detail of your playing, instantly. It`s 1/4" input jack works with both active and passive basses and allows you to EQ your sound with Low, Mid Low, High Low, and High control knobs, as well as Markbass` exclusive VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters, with separate Gain and Master volume controls. The rear panel has a balanced XLR out, Neutrik Speakon Combo jacks which work with either Speakon or 1/4" speaker cables, a tuner out, as well as Effect Send and Return 1/4" jacks to ensure you don`t lose your main signal if a piece of your effects chain dies. There is also a ground lift switch to help eliminate hum. Despite being lightweight, the Markbass F1 bass head is made with a rigid 2mm thick aluminum chassis to ensure your investment can handle the rigors of the road.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
-
Power
-
Input impedance: 500Kohm, max. voltage: 15 Vpp
-
Effect Return impedance: 33Kohm, max. voltage: 25 Vpp
-
Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
-
Power Requirement: 100V; 120V; 230V; 240V; 50/60Hz
Controls
-
GAIN: 80dB to +25dB range
-
GROUND LIFT: Switch on rear panel
-
MASTER VOLUME
Equalization
-
LOW
-
Center frequency: 40Hz; level ±16dB
-
LOW MID
-
Center frequency 360Hz, level ±16dB
-
HIGH MID
-
Center frequency 800Hz, level ±16dB
-
HIGH
-
10kHz shelf; level ±16dB
-
VPF (Variable Pre-shape Filter)
-
center frequency 380Hz (cut)
-
VLE (Vintage Loudspeaker Emulator)
-
frequency range 250Hz 20 kHz (cut)
Outputs
-
EFFECT SEND
-
Unbalanced, max. voltage 20 Vpp (pre-EQ)
-
TUNER OUT
-
Unbalanced, max. voltage 25 Vpp
-
LINE OUT
-
Balanced XLR, max. voltage 10 Vpp
-
SPEAKER OUT
-
Speakon, 1/4" x 2
Other
-
Dimensions: 10.87"(W) x 1.73"(H) or (1U) x 10.04"(D)
-
Weight: 4.63 lbs.
|
